The Signet 9900-1BC Batch Controller system provides control capability and process fine-tuning in a familiar package. The programming interface uses a fourbutton keypad and an intuitive menu for adjusting a batching system to the best performance possible. Choose between simple or advanced modes. In simple mode, relay outputs can be used for batching, external counter, missing signal alarm and 4 to 20 mA output can be used to indicate batch status. In advanced mode relays can also be used for end of batch pulse, twostage shutdown, overrun alarm, high flow detection, total volume or source volume alarm.
仪表：：
自定义10个批次名称，以便于对批进行区分
储存多达10批大小的液体，用于配料或混合各种液体体积
远程批控制用启动、停止和恢复终端的遥控接线
3个可编程继电器
两阶段控制，以防止过充或尽量减少水锤。
输入10个不同的K-因子-每批一批输入不同液体的批次。
技术参数
特性
文档
游泳池:
两阶段控制，以防止过充或尽量减少水锤。
3 programmable relays, one open collector, two dry-contact relays
远程批控制用启动、停止和恢复终端的遥控接线
Modular Design - Can be purchased as a complete system or add a Batch Module and Relay Module to an existing 9900 Transmitter (Generation II)
自定义10个批次名称，以便于对批进行区分
储存多达10批大小的液体，用于配料或混合各种液体体积
Confirmation START/RESUME – Can prompt user prior to starting each batch with a Yes/No or password to prevent inadvertently starting a batch
